Bush F - 370 Bedienungsanleitung PDF herunterladen (Seite 48)

ALFRA Combi machining cart – 4-Stations

For copper and aluminium bars • Made in Germany by ALFRA

For - Bending busbars 120 x 12 mm,

- Punching busbars Ø 6.6 - 21.5 mm,

- Cutting busbars 125 x 12 mm,

- Cable shoe pressing from 10 - 300 mm

- Punching all PG-sizes as well as square and specially

shaped holes.

n The machining stations for bending busbars and punching as well as

cutting are sunk in the table. They facilitate quick and clean working.

n The universal working cylinder can be raised and lowered by means of

a hand-wheel in an inﬁnitely variable manner by hydraulic means accor-

ding to the hole pattern to be punched.

n The machining units are coupled to an hydraulic central unit located

inside the cart.

n A laterally extractable extension is provided as support pad for longer

rails.

n To the 2 additional laterally attached hydraulic hoses, pressing heads

(e.g. pressing head 10 - 300 mm

Prod.-No. 03360) and the hydraulic

cylinder Prod.-No. 02012 for punching holes are connected.

n 1 foot switch belongs to the scope of delivery. Up to

3 additional foot switches can be connected to different stations.

n In the cart there are 4 tools drawers with compartments for punches

and dies.

It is movable on 4 running rollers, of which 2 are provided with locks.

Technical Data:

Motor voltage: 400 V / 50 Hz

Motor power: 1.1 kW

Max. operating pressure: 700 bar

Presetting: 600 bar

Pump capacity: 0.88 l/min.

Tank volume: 17.0 l

Useful oil volume: 13.0 l

Weight approx: 240 kg

Table size: 1150 x 700 mm

Dimension L x W x H: 1250 x 760 x 1.210 mm

Prod.-No.

Machining cart ready for operation 03980

Required extra accessory

Punch and dies Ø 6.6 - 21.5 mm

Prod.-No. 03204 - 03225

Hydraulic press head 10 - 300 mm

03360

Hydraulic cylinder 02012

Hydraulic screw 19.0 mm 02002

Hydraulic screw Ø 19.0 x 9.5 mm 02003

Distance bushes set (5 pieces) 02014

Foot switch with connection cable 3-pole 03861

Prod.-No. 03980 (delivery without additional machines)

Inside the cart there are 4 tools drawers with compartments for punches

and dies.

Inch sizes are available on request

A/48

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare

Bush F - 370 Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern